- Contact Us
- Office: 01202 892211
- Mobile: 07969 671515
- mail@cherrypickers.co.uk
As of my last update in April 2023, whether a cherry picker can run on red diesel depends on the specific regulations in place at the time and the intended use of the cherry picker. Red diesel, also known as gas oil, is a fuel that is taxed at a lower rate compared to standard white diesel in many countries, including the UK. The reduced tax rate is intended for certain types of off-road vehicles and machinery, primarily for agricultural, horticultural, fish farming, and construction purposes.
In the UK, the rules regarding the use of red diesel have undergone changes. Previously, a wider range of vehicles and equipment, including those used in construction like cherry pickers, could use red diesel. However, changes in legislation that came into effect in April 2022 significantly restricted its use in many sectors, including construction. Under the new rules, most uses in construction, including cherry pickers, would generally not be eligible for red diesel unless they are used for specific exempt activities such as agriculture or forestry.
It's important to check the most current regulations as they can vary by country and can change over time. Misuse of red diesel in equipment that is not eligible under the current regulations can result in heavy fines and penalties. Therefore, it's advisable to consult the latest guidelines or seek advice from a relevant authority to ensure compliance.
The duration of a LOLER (Lifting Operations and Lifting Equipment Regulations) test can vary depending on several factors, such as the type of equipment being inspected, its complexity, the number of items being tested, and the condition of the equipment. Typically, a LOLER inspection might take anywhere from 30 minutes to several hours per piece of equipment.
For simpler devices like small hoists or lifting accessories, the inspection might be relatively quick, possibly completed within 30 minutes to an hour. In contrast, more complex systems like tower cranes or large industrial lifts could take several hours to thoroughly inspect due to their complexity and the number of components that need to be checked.
It's important to note that the time taken for a LOLER test should not be rushed; it's crucial that the inspection is thorough to ensure the safety and compliance of the equipment. The main goal is to identify any potential risks or defects that could lead to accidents or failures. Therefore, the time taken for a LOLER test is primarily driven by the necessity to conduct a comprehensive and detailed examination.
A LOLER test, which stands for Lifting Operations and Lifting Equipment Regulations, is a safety inspection conducted in the United Kingdom. This test is part of a legal requirement under the LOLER 1998 regulations, which aim to ensure that all lifting equipment is fit for purpose, safe to use, and properly maintained.
The main aspects of a LOLER test include:
Thorough Examination: The equipment is examined thoroughly by a competent person to detect any defects that might pose a risk to health and safety.
Risk Assessment: A risk assessment is conducted to determine the safety and integrity of the lifting equipment.
Certification: After a successful inspection, a certificate of thorough examination is issued, which must be kept on file.
Regular Inspections: LOLER tests are not one-time events. Regular inspections and tests are required, typically every 6 to 12 months, depending on the type of equipment and its usage.
Record Keeping: Records of all inspections and tests must be maintained as part of compliance with the regulations.
The LOLER regulations apply to a wide range of equipment, including cranes, forklifts, lifts, hoists, and other equipment used at work for lifting or lowering loads, including attachments used for anchoring, fixing, or supporting it. The goal of these regulations is to reduce the risk of accidents from lifting operations, ensuring a safer work environment.
LOLER (Lifting Operations and Lifting Equipment Regulations) inspections are legally required at regular intervals in the UK. The frequency of these tests depends on the type of equipment and how it's used. Here's a general guideline:
For Lifting Equipment: This includes equipment such as cranes, hoists, and lifts. LOLER inspections are required at least every 6 months.
For Accessories for Lifting: Items like slings, chains, and ropes fall into this category. These also require inspections at least every 6 months.
For Equipment Used to Lift People: Any lifting equipment that is used to lift people, such as passenger lifts or access platforms, must be inspected every 6 months.
For Other Lifting Equipment: For equipment not frequently used to lift people, such as forklifts, the required inspection frequency is at least every 12 months.
Exceptional Circumstances: If a competent person deems it necessary, inspections may be required more frequently. This can be based on the equipment's usage, environment, or as a result of previous inspection findings.
Additionally, a thorough examination is required:
It's essential to maintain records of all LOLER inspections and to ensure that any identified issues are addressed promptly to maintain compliance and safety.
8.30 to 5.30 Monday to Friday
9 till 12 noon Saturday
Closed Sunday
Sign up to hear about our latest stock and updates
